EXTEND YOUR WIFI WITH A WIRELESS N WIFI REPEATER SETUP

Extend Your WiFi with a Wireless N WiFi Repeater Setup

Extend Your WiFi with a Wireless N WiFi Repeater Setup

Blog Article

A Wireless N WiFi repeater works by connecting to your home router and amplifying the WiFi signal to extend coverage in areas with weak or no signal. Whether you're setting up the repeater in Repeater mode or Access Point (AP) mode, the following instructions will guide you through the process, with both Manual and WPS methods explained.

Modes of Operation for the Wireless N WiFi Repeater


  • Repeater Mode: This is the default mode, where the repeater wirelessly connects to your router and extends the network signal.

  • AP Mode: In this mode, the repeater is connected to the router via a wired Ethernet connection, creating a new WiFi network.

  • Important Note: Regardless of the mode you choose, you must access the URL http://myrepeater.net for setup, except when using the WPS method.


Setting Up the Wireless N WiFi Repeater in Repeater Mode

To set up your repeater in Repeater Mode, follow these steps using a mobile device, laptop, or desktop computer:

  1. Power Off your existing router and place your Wireless N repeater in the same room.

  2. Turn On your router, followed by the repeater.

  3. Wait for the lights on the repeater to become stable, then open your device’s WiFi settings.

  4. Look for the repeater’s WiFi network name (typically printed on the label) and connect to it.

  5. Open an internet browser and go to http://myrepeater.net or 192.168.10.1.

  6. Enter the default username and password (both set to “admin” unless changed) when prompted.

  7. Click on Setup Wizard, then choose Wireless Repeater Mode and select Repeater - OneKey Setting.

  8. From the list, select your router’s network, which you will be extending.

  9. Hit Next and enter your router's WiFi password in the Pre-Shared Key field.

  10. Click Apply, then Reboot and finally OK.

  11. The repeater will now be in Repeater mode, and the status will show "Connected."

  12. Congratulations, you've successfully set up your Wireless N WiFi repeater!


Setting Up the Wireless N WiFi Repeater in AP Mode

Setting up your repeater in AP mode is similar to the process for Repeater Mode, with a slight variation in the setup path:

  • Follow the same initial steps to access the repeater’s interface via http://myrepeater.net.

  • After logging in, select Setup Wizard, then choose Standard Wireless AP Mode, and click Next.

  • Input the repeater's security settings and change the encryption standard to WPA2.

  • Remember, you must connect the repeater to the router using an Ethernet cable for AP mode.


Setting Up the Wireless N WiFi Repeater Using WPS

The WPS (Wi-Fi Protected Setup) method is the simplest way to connect your repeater. Here's how to do it:

  • Place the Wireless N repeater near your main router.

  • Restart the router.

  • Power on the repeater.

  • Find the WPS button on the repeater and press it.

  • Within 2 minutes, press the WPS button on your router.

  • The devices will connect automatically, completing the setup process.

  • If both your router and repeater support WPS, this method is the fastest. If not, you may need to enable WPS via their web interfaces.


Logging In to the Wireless N WiFi Repeater After Setup

Many users prefer to change the default admin password during setup, which can sometimes cause login issues afterward. Here's how to log in to your repeater after setup:

  • Connect your device (phone or laptop) to the WiFi network of your Wireless N repeater.

  • Open a web browser and navigate to http://myrepeater.net.

  • The login page will appear. Enter the username and password you set during setup.

  • Click OK to access the repeater’s dashboard.

  • If you've forgotten your credentials, simply reset the repeater and repeat the setup process.

Report this page